#1033 - RFQ Overview
ERN-004/2022-23 Dated : 04/06/2022 For IBR Approved Safety Valves
This requirement was submitted on June 18, 2022, 12:00 AM
List of Materials/Services
Car overview
| # | Product Name | Quantity | Unit | Description |
|---|---|---|---|---|
| 1 | Special Bearings & Transmission Solutions | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 2 | Butterfly Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 3 | Check Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 4 | Threaded Rods & Studs | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 5 | Pressure Relief Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 6 | Ball Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 7 | Floating Ball Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 8 | Full Bore & Reduced Bore Ball Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 9 | Multi-Way Ball Valves (3-way, 4-way) | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 10 | Trunnion Mounted Ball Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 11 | V-Port Ball Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 12 | Butterfly Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 13 | Concentric Butterfly Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 14 | Double Offset & Triple Offset Butterfly Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 15 | High-Performance Butterfly Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 16 | Check Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 17 | Dual Plate Check Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 18 | Lift Check Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 19 | Swing Check Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 20 | Tilting Disc Check Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 21 | Cryogenic Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 22 | Cryogenic Ball Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 23 | Cryogenic Check Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 24 | Cryogenic Gate Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 25 | Cryogenic Globe Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 26 | Diaphragm Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 27 | Straight-Through Diaphragm Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 28 | Weir-Type Diaphragm Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 29 | Gate Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 30 | Knife Gate Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 31 | Pressure Seal Gate Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 32 | Rising Stem & Non-Rising Stem Gate Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 33 | Wedge Gate Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 34 | Globe Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 35 | Angle Globe Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 36 | Pressure Seal Globe Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 37 | Y-Type & T-Type Globe Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 38 | Plug Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 39 | Lubricated Plug Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 40 | Multiport Plug Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 41 | Non-Lubricated Plug Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 42 | Pressure Relief & Safety Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 43 | Pilot-Operated Safety Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 44 | Pressure Reducing Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 45 | Spring-Loaded Safety Valves | 1 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Super Heater, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 46 | Special Bearings & Transmission Solutions | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 47 | Butterfly Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 48 | Check Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 49 | Threaded Rods & Studs | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 50 | Pressure Relief Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 51 | Ball Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 52 | Floating Ball Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 53 | Full Bore & Reduced Bore Ball Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 54 | Multi-Way Ball Valves (3-way, 4-way) | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 55 | Trunnion Mounted Ball Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 56 | V-Port Ball Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 57 | Butterfly Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 58 | Concentric Butterfly Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 59 | Double Offset & Triple Offset Butterfly Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 60 | High-Performance Butterfly Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 61 | Check Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 62 | Dual Plate Check Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 63 | Lift Check Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 64 | Swing Check Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 65 | Tilting Disc Check Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 66 | Cryogenic Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 67 | Cryogenic Ball Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 68 | Cryogenic Check Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 69 | Cryogenic Gate Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 70 | Cryogenic Globe Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 71 | Diaphragm Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 72 | Straight-Through Diaphragm Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 73 | Weir-Type Diaphragm Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 74 | Gate Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 75 | Knife Gate Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 76 | Pressure Seal Gate Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 77 | Rising Stem & Non-Rising Stem Gate Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 78 | Wedge Gate Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 79 | Globe Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 80 | Angle Globe Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 81 | Pressure Seal Globe Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 82 | Y-Type & T-Type Globe Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 83 | Plug Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 84 | Lubricated Plug Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 85 | Multiport Plug Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 86 | Non-Lubricated Plug Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 87 | Pressure Relief & Safety Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 88 | Pilot-Operated Safety Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 89 | Pressure Reducing Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 90 | Spring-Loaded Safety Valves | 2 | Pieces | Any Standard Make IBR Approved Safety Valve Suitable for 25 TPH Boiler, 45 Kg/Cm², 450˚ C with IBR Test Certificate, Application: Boiler Steam Drum, End Connection: Flanged End, Inlet Connection: 40 NB, PCD: 120mm, Outlet Connection: 80 NB, PCD: 155mm, Orifice Standard, Suitable for boiler Design Pressure, Seat Pressure & Back Pressure Parameter as per Standard Operating for Boiler Safety Valve. |
| 91 | Special Bearings & Transmission Solutions | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 92 | Butterfly Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 93 | Check Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 94 | Threaded Rods & Studs | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 95 | Pressure Relief Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 96 | Ball Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 97 | Floating Ball Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 98 | Full Bore & Reduced Bore Ball Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 99 | Multi-Way Ball Valves (3-way, 4-way) | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 100 | Trunnion Mounted Ball Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 101 | V-Port Ball Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 102 | Butterfly Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 103 | Concentric Butterfly Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 104 | Double Offset & Triple Offset Butterfly Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 105 | High-Performance Butterfly Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 106 | Check Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 107 | Dual Plate Check Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 108 | Lift Check Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 109 | Swing Check Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 110 | Tilting Disc Check Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 111 | Cryogenic Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 112 | Cryogenic Ball Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 113 | Cryogenic Check Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 114 | Cryogenic Gate Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 115 | Cryogenic Globe Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 116 | Diaphragm Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 117 | Straight-Through Diaphragm Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 118 | Weir-Type Diaphragm Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 119 | Gate Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 120 | Knife Gate Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 121 | Pressure Seal Gate Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 122 | Rising Stem & Non-Rising Stem Gate Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 123 | Wedge Gate Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 124 | Globe Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 125 | Angle Globe Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 126 | Pressure Seal Globe Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 127 | Y-Type & T-Type Globe Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 128 | Plug Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 129 | Lubricated Plug Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 130 | Multiport Plug Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 131 | Non-Lubricated Plug Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 132 | Pressure Relief & Safety Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 133 | Pilot-Operated Safety Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 134 | Pressure Reducing Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
| 135 | Spring-Loaded Safety Valves | 1 | Pieces | Sanmar / Crossby / Any Standard Make IBR Approved Spring Loaded both End Flanged End, Boiler Safety Valve for Super Heater Steam of Boiler Steam Generating Capacity as follows, Working Pressure: 21 Kg/Cm² & Steam Temperature: 340˚ C ±5˚ C, Design Pressure: 24.5 Kg/Cm², Class-300#, Set Pressure: 5% More, Flange Details as for follows (Existing Valve), Inlet Valve Flange Dia: 40NB, Valve Flange Outside Dia: 158mm, Valve Flange PCD: 114mm, No of Holes: 04 Nos, Hole Size: 22mm, 1) for 25 T/hr cap, Boiler No: 4 (MR 9491). |
