#1769 - RFQ Overview
Requirement of Valve
This requirement was submitted on April 4, 2023, 12:00 AM
List of Materials/Services
Car overview
| # | Product Name | Quantity | Unit | Description |
|---|---|---|---|---|
| 1 | Special Bearings & Transmission Solutions | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 2 | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
|
| 3 | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
|
| 4 | Threaded Rods & Studs | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 5 | Pressure Relief Valves | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 6 | Ball Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 7 | Floating Ball Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 8 | Full Bore & Reduced Bore Ball Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 9 | Multi-Way Ball Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 10 | Trunnion Mounted Ball Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 11 | V-Port Ball Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 12 | Butterfly Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 13 | Concentric Butterfly Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 14 | Double Offset & Triple Offset Butterfly Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 15 | High-Performance Butterfly Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 16 | Check Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 17 | Dual Plate Check Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 18 | Lift Check Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 19 | Swing Check Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 20 | Tilting Disc Check Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 21 | Cryogenic Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 22 | Cryogenic Ball Valves | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 23 | Cryogenic Check Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 24 | Cryogenic Gate Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 25 | Cryogenic Globe Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 26 | Diaphragm Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 27 | Straight-Through Diaphragm Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 28 | Weir-Type Diaphragm Valves | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 29 | Gate Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 30 | Knife Gate Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 31 | Pressure Seal Gate Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 32 | Rising Stem & Non-Rising Stem Gate Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 33 | Wedge Gate Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 34 | Globe Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 35 | Angle Globe Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 36 | Pressure Seal Globe Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 37 | Y-Type & T-Type Globe Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 38 | Plug Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 39 | Lubricated Plug Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 40 | Multiport Plug Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 41 | Non-Lubricated Plug Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 42 | Pressure Relief & Safety Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 43 | Pilot-Operated Safety Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
| 44 | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
|
| 45 | Spring-Loaded Safety Valve | 2 | Pieces | VALVE,DBB,ALCO-VLV,10D1Z4NL12ARIC290001 Valves, engineered Type DOUBLE BLOCK AND BLEED Temperature range +200 TO -46 °C Pressure designation ASME CL 150 Body, construction ONE PIECE Ball, construction FLOATING Type, block valve BALL Type, bleed valve NEEDLE Facing, flange RAISED FACE Outlet, connection NPT FEMALE Mat, body CARBON STEEL Mat spec, body ASTM A350 LF2/A105 Mandatory requirement ANTI-STATIC DEVICE Size, inlet 1.1/2 in Size, outlet 1/2 in Design spec, vent/drain ASME B1.20.1 Size, vent/drain 1/2 in Connection, vent/drain NPT FEMALE (BLANKING PLUG) Size, bore 10 mm 3/8 in Mat spec. trim ASTM A479 GRADE 316 (MFR PMA) Mat, stem 17-4PH Mat, seat PEEK Mat, seal GRAPHITE O-ring ENDURA V91A Pressure rating, max ASME CLASS 150 Pressure rating, min 6 barg 87 psi Type, operated HANDLE Mat, lever STAINLESS STEEL Type, handle T-BAR Complete with injection quill Manufacturer ALCO VALVES Manufacturer Part Number 10D1Z4NL-12AR-IC290-001 |
Chat on WhatsApp