#2516 - RFQ Overview
RFQ Coil Bolts & Nuts (DFI 089)
This requirement was submitted on January 28, 2025, 2:31 PM
List of Materials/Services
Car overview
| # | Product Name | Quantity | Unit | Description |
|---|---|---|---|---|
| 1 | Bolts & Screws | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 2 | Anchor Bolts | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 3 | Carriage Bolts | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 4 | Drywall Screws | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 5 | Eye Bolts | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 6 | Flange Bolts | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 7 | Hex Bolts | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 8 | Machine Screws | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 9 | Roofing Screws | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 10 | Self-Tapping Screws | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 11 | Socket Head Cap Screws | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 12 | Stud Bolts | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 13 | U-Bolts | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 14 | Wood Screws | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 15 | Metal Fasteners & Hardware | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 16 | Anchors & Studs | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 17 | Clamps & Clips | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 18 | Threaded Rods | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 19 | Washers & Rivets | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 20 | Nuts & Washers | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 21 | Fender Washers | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 22 | Flange Nuts | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 23 | Flat Washers | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 24 | Hex Nuts | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 25 | Lock Nuts (Nylon Insert, Jam Nuts) | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 26 | Lock Washers | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 27 | Spring Washers | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 28 | Square Nuts | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 29 | T-Nuts | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 30 | Wing Nuts | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 31 | Threaded Rods & Studs | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
| 32 | Single-End Studs | 1 | Pieces | ¾” x 10’ steel chamfer Qty 1,500 1” x 10’ steel chamfer Qty 300 2” x ¾” Coil Bolt Qty 10,000 ¾” coil nut Qty 10,000 1-1/2” x ½” Coil Bolt Qty 15,000 ½” Coil nut Qty 15,000 Strut Assb. w/ Rod (as drawn) Qty 1,000 NOTE: Coil nuts & bolts - ASTM A307, Grade A (additional info found attached) The chamfer is just tack welded onto formwork and doesn’t take much load. I think 1018 steel or something similar is commonly used. Let me know if you have any additional questions. |
Requirement published by
********** FITT INC
Bhandari Street, Cawasji Patel Tank, Kumbharwada, Mumbai, Maharashtra 400004, India