Request for Quotation Overview (#4448)

Home Requirements (RFQs)Request for Quotation Overview (#4448)

#4448 - RFQ Overview

VALVES

This requirement was submitted on August 10, 2025, 12:00 AM

#	Product Name	Quantity	Unit	Description
1	Special Bearings & Transmission Solutions	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
2		77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
3		77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
4	Threaded Rods & Studs	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
5	Pressure Relief Valves	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
6	Ball Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
7	Floating Ball Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
8	Full Bore & Reduced Bore Ball Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
9	Multi-Way Ball Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
10	Trunnion Mounted Ball Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
11	V-Port Ball Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
12	Butterfly Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
13	Concentric Butterfly Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
14	Double Offset & Triple Offset Butterfly Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
15	High-Performance Butterfly Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
16	Check Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
17	Dual Plate Check Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
18	Lift Check Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
19	Swing Check Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
20	Tilting Disc Check Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
21	Cryogenic Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
22	Cryogenic Ball Valves	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
23	Cryogenic Check Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
24	Cryogenic Gate Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
25	Cryogenic Globe Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
26	Diaphragm Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
27	Straight-Through Diaphragm Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
28	Weir-Type Diaphragm Valves	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
29	Gate Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
30	Knife Gate Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
31	Pressure Seal Gate Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
32	Rising Stem & Non-Rising Stem Gate Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
33	Wedge Gate Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
34	Globe Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
35	Angle Globe Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
36	Pressure Seal Globe Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
37	Y-Type & T-Type Globe Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
38	Plug Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
39	Lubricated Plug Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
40	Multiport Plug Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
41	Non-Lubricated Plug Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
42	Pressure Relief & Safety Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
43	Pilot-Operated Safety Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
44		77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached
45	Spring-Loaded Safety Valve	77	Pieces	VALVE,BALL, FLOATING, STAINLESS STEEL-316, THREADED, NPT FEMALE, KOC-MP-033 PART-1, FULL BORE, STAINLESS STEEL-316, STAINLESS STEEL-316, STAINLESS STEEL-316, RPTFE, BOLTED, RPTFE, GRAPHITE, HAND LEVER, 600 LB, 1/2 INCH BODY MATERIAL: SS316 SERVICE: SOUR SERVICE BALL: SS316 STEM AND TRUNNION: SS316 SEAT SEAL: RPTFE SPRING: INCONEL X-750 BOLTING: A 193 B7M/A 194 2HM STANDARD AS PER API 6D/KOC-MP-033/BS EN ISO 17292:2015 (SUPERCEDES BS 5351) TROPICAL PACKAGING REQUIRED IMPORTANT NOTE: 1. NO VISIBLE LEAKAGE ALLOWED IN ALL TESTS 2. NO REPAIR WORK SHALL BE CARRIED OUT BY THE MANUFACTURER WITHOUT BRINGING IT TO THE KNOWLEDGE OF KOC 3. ALL VALVES SHALL BE SUPPLIED FROM THE APPROVED LIST OF MFR. MATERIAL SHALL BE FROM UNIFIED KPC APPROVED LIST OF MFR. ID: KM 08-01, 4. MTC IS MANDATORY TO BE SUPPLIED WITH EACH CONSIGNMENT 5. ALL SUPPLIERS SHALL CONFIRM THE ACCEPTANCE OF THIRD PARTY INSPECTION 6. TPI REQUIREMENT WILL BE ADVISED IN THE PURCHASE ORDER. SCOPE OF INSPECTION SHALL BE AS PER KOC STANDARD 7. FOR ALL VALVES TO API 6A AND API 6D MONOGRAMMING IS MANDATORY 8. ALL VALVES (EXCEPT BRONZE CONSTRUCTION) SHALL CONFORM TO NACE MR0175/ISO 15156 9. ALL VALVES SHALL BE MARKED AS PER RELEVANT STANDARDS 10. ALL VALVES SHALL HAVE RENEWABLE SEAT. BOTH SEAL WELDED AND THREADED SEATS ARE ACCEPTED. 11. ALL VALVES SHALL HAVE INTEGRAL FLANGED (CASTED OR FORGED WITH THE BODY). FLANGED WELDED TO THE BODY IS NOT ACCEPTED. Other Discription as per attached

Delivery Information

Delivery Country
Last Bid Date:

Aug 15, 2025
Bid Currency:

AED
Delivery Terms:

Select Terms
Other Terms:

1. Commercial Submission Signed & stamped quotation in Kuwaiti Dinars (KD), per item and total price. Delivery period in exact weeks from contract signing (no ranges). Offer validity: minimum 90 days from bid closing date. Warranty terms (as per KOC requirements). Acceptance of Third-Party Inspection (TPI). Country of Origin (must match KM 08-01 approval). 2. Technical Submission For each line item, please provide: Filled-in KOC Valve Data Sheet (Appendix II of KOC-MP-033). General Arrangement Drawings (GA) with full dimensions. Bill of Materials (BOM). Manufacturer’s Technical Catalogue & Datasheets. Material specifications for body, trim, seats, seals, etc. (matching RFQ). Compliance Statement (Attachment D & E of Form of Tender) – confirm full compliance or list deviations. Fire Safe Test Certificate (API 607 / API 6FA / ISO 10497, as applicable). NACE MR0175 / ISO 15156 compliance certificate (for sour service valves). API 6D (and/or API 6A if applicable) Monogram Certificate. Class Approval Certificate from IACS Member (if applicable). Sample Material Test Certificates (MTCs) from previous production. 3. Authorization & Registration Manufacturer’s Authorization Letter to Global Tarweed (addressed to KOC for Tender No. 2147633). Copy of manufacturer’s KOC approval (KM 08-01 list page). ISO 9001 / 14001 / 45001 certificates. 4. KOC Special Confirmations Please confirm in writing: No visible leakage in all tests. Renewable seat design (where required). No repair work without KOC written approval. Integral flanged ends (cast or forged with the body) where required. Marking as per relevant standards. Acceptance of liquidated damages: 0.5% per week, max 10%. Attachments: RFQ Tender Items & Specifications (Tender No. 2147633) Particular Instructions to Tenderer (KOC) KM 08-01 Approved Manufacturer List (Your company highlighted) Form of Tender (for your review)